Switch Industrial 8Ptos gigabit+2-Ptos. SFP Managed L2 PoE+

Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-10020HPT, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.

The IGS-10020HPT supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments.

Especifications:
- Copper Ports: 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 100/1000/2500BASE-X mini-GBIC SFP ports (Port-9 and Port-10)
- Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
- Switch Architecture: Store-and-Forward
- Switch Fabric: 26Gbps/non-blocking
- Throughput (packet per second): 14.8Mpps@ 64Bytes packet
- Address Table: 8K entries, automatic source address learning and aging
- Shared Data Buffer: 4Mbits
- Flow Control: IEEE 802.3x pause frame for full-duplex
- Back pressure for half-duplex
- Jumbo Frame: 9Kbytes
- ESD Protection: 6KV DC
- EFT Protection: 6KV DC
- Enclosure: IP30 aluminum case
- Installation: DIN-rail kit and wall-mount kit
- Connector: Removable 6-pin terminal block for power input. Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2. Removable 6-pin terminal block for DI/DO interface. Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
- Alarm: One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V
- DI/DO: 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
- 2 Digital Output (DO): Open collector to 24V DC, 100mA max.
- Dimensions (W x D x H): 76.8 x 107.3 x 152 mm
- Weight: 1096g
- Power Requirements: DC 12-48V
- Power Consumption258 watts/880BTU (Full loading with PoE function)
- Power Over Ethernet
- PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End-span
- PoE Power OutputPer port 52V DC, 350mA; max. 15.4 watts (IEEE 802.3af)
- Per port 52V DC, 590mA; max. 36 watts (IEEE 802.3at)
- Power Pin Assignment: 1/2(+), 3/6(-)
- PoE Power Budget: 60W maximum (DC 12V power input). 120W maximum (DC 24V power input). 240W maximum (DC 48V power input)

Layer 2 Function
- Port ConfigurationPort disable/enable
- Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
- Flow control disable/enable
- Port Mirroring: TX/RX/both
- 1 to 1 monitor
- VLAN: 802.1Q tagged based VLAN, up to 255 VLAN groups
- Q-in-Q tunneling
- Private VLAN Edge (PVE)
- MAC-based VLAN
- Protocol-based VLAN
- Voice VLAN
- GVRP
- MVR (Multicast VLAN Registration)
- Up to 255 VLAN groups, out of 4094 VLAN IDs
- Link Aggregation: IEEE 802.3ad LACP/static trunk
Supports 5 trunk groups with 2 ports per trunk group
- QoS: Traffic classification based, strict priority and WRR
- 8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
- IGMP Snooping: IGMP (v1/v2/V3) snooping, up to 255 multicast groups
- IGMP querier mode support
- MLD Snooping: MLD (v1/v2) snooping, up to 255 multicast groups
- MLD querier mode support
- Access Control List: IP-based ACL/MAC-based ACL
- Up to 123 entries
- Bandwidth Control: Per port bandwidth control