Crestron Control Processor RMC3 unit

CRESTRON RMC3. 3-Series® Room Media Controller. An extremely compact 3-Series® control processor featuring the Crestron IFE micro form factor. Fits almost anywhere to suit a variety of specialized applications.

Control Engine:
- Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs (license required [1])
- Memory: DDR3 SDRAM: 256 MB. Flash: 4 GB. External Storage: supports USB mass storage devices.
- Communications: Ethernet. 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [3], IPv4 or IPv6, Active Directory authentication, web server, SMTP e-mail client, IEEE 802.3af and 802.3at Type 1 compliant. Cresnet: Cresnet master mode. USB: Supports computer console and USB mass storage devices via USB OTG (On-The-Go) port. RS-232/422/485. For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking. IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud.
- Connectors: DIGITAL IN 1 – 2. (1) 3-pin 3.5 mm detachable terminal block; Comprises (2) digital inputs (referenced to GND); Input Voltage Range: 0-24 Volts DC; Logic Threshold: = 2.0 Volts DC 0/low, =1.1 Volt DC 1/high; Input Impedance: 2.2k Ohms pulled up to 5 Volts. RELAY 1 – 2(1) 4-pin 3.5 mm detachable terminal block; Comprises (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts
- IR 1 – 2(1) 4-pin 3.5 mm detachable terminal block;
- Comprises (2) IR/Serial output ports;
- IR output up to 1.2 MHz;
- 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
- COM(1) 5-pin 3.5 mm detachable terminal block;
- Bidirectional RS-232/422/485 port;
- Up to 115.2k baud; hardware and software handshaking support
- G: (1) 4-40 screw;
- Chassis ground lug: USB-OTG: (1) USB Type Mini-AB female;
USB OTG port for computer console and USB mass storage devices (6 ft A male to Mini-B male cable, and A female to Mini-A male adapter, included). LAN PoE: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port, Power over Ethernet compliant. NET: (1) 3-pin 3.5 mm detachable terminal block; Cresnet master port (data only, no power [2])
- Controls & Indicators: PWR: (1) Dual-color green/amber LED, indicates operating power supplied via PoE, turns amber while booting and green when operating. NET: (1) Amber LED, indicates communication with the Cresnet system. MSG: (1) Red LED, indicates processor has generated an error message. LAN PoE. (2) LEDs, green LED indicates 100Mbps Ethernet link status, amber LED indicates Ethernet activity.
- HW-R: (1) Recessed miniature pushbutton for hardware reset
- SW-R: (1) Recessed miniature pushbutton for software reset
- Power Requirements: Power over Ethernet IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95W) PoE Powered Device
- NOTE: Does not use or supply any Cresnet power
Environmental: Temperature32° to 104° F (0° to 40° C). Humidity: 10% to 90% RH (non-condensing). Heat Dissipation: 17 BTU/hr.
- Construction: Enclosure: IFE micro form factor, black and blue plastic. - Mounting: Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; occupies 8 DIN module spaces (144 mm); surface/DIN rail mounting bracket included, optional rack mount and pole mount kits sold separately.
- Dimensions: Height: 1.35 in (35 mm), 1.77 in (45 mm) with bracket. Width: 5.04 in (128 mm), 5.36 in (137 mm) with bracket. Depth: 2.86 in (73 mm)
Weight: 6.4 oz (180 g).