Switch Industrial 16Ptos Gig+4-Ptos. SFP Managed L2 PoE+

Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch.

IGS-20160HPT L3 Industrial Managed PoE+ Switch, featuring 16 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 100/1000/2500BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.

Hardware Specifications:
- Copper Ports: 18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000/2500BASE-X SFP interfaces (Port-19 and Port-20)
- Compatible with 100BASE-FX SFP
- PoE Injector Port: 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
- Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
- Reset Button: < 5 sec: System reboot. > 5 sec: Factory default
- ESD Protection: 6KV DC
- Enclosure: IP30 aluminum case
- Installation: DIN-rail kit and wall-mount kit
- Connector: Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
- Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
- Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC

Switching
- Switch Architecture: Store-and-Forward
- Switch Fabric: 46Gbps/non-blocking
- Throughput (packet per second): 34.2Mpps@ 64 bytes packet
- Address Table: 32K entries, automatic source address learning and aging
Shared Data Buffer32Mbits
- Flow Control: IEEE 802.3x pause frame for full duplex
- Back pressure for half duplex
- Jumbo Frame: 10K bytes
- Power Over Ethernet
- PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End-span
- PoE Power Output: IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~56V DC (depending on the power supply), max. 36 watts
- Power Pin Assignment: 1/2(+), 3/6(-)
- PoE Power Budget: 48V Power input
- 240W maximum (depending on power input)
52~56V Power input
- Single power input: 240W maximum (depending on power input)
- Dual power input: 320W maximum (depending on power input)
- Dual power input must be the same as DC voltage, like dual 56V
- Max. Number of Class 2 PDs16
- Max. Number of Class 3 PDs16
- Max. Number of Class 4 PDs10

Layer 3 Functions
- IP Interfaces: Max. 128 VLAN interfaces
- Routing Table: Max. 128 routing entries
- Routing Protocols: IPv4 hardware static routing
- IPv6 hardware static routing
- IPv4 OSPFv2 dynamic routing