Industriales
The Cisco® Industrial Ethernet 2000 (IE 2000) Series is a range of compact, ruggedized access switches that handle security, voice, and video traffic across industrial networks. They provide customers in industries such as automotive, oil and gas, mining, transportation, and energy with highly secure access and industry-leading convergence using Cisco Resilient Ethernet Protocol (REP).
The Cisco® Industrial Ethernet 2000 (IE 2000) Series is a range of compact, ruggedized access switches that handle security, voice, and video traffic across industrial networks. They provide customers in industries such as automotive, oil and gas, mining, transportation, and energy with highly secure access and industry-leading convergence using Cisco Resilient Ethernet Protocol (REP).
Product details:
The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
- Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected
models); fixed configurations with a compact form factor
- Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
- Dual-input DC power supply, alarm relays, DIN rail mount
- Industrial Power over Ethernet (PoE) solution
- Conformal coating available
- Swappable SD flash card and mini-USB connector
- Industrial environmental compliance and certifications
- Industrial partner applications: Ethernet/IP and PROFINET
Switch performance and scalability:
- Maximum Forwarding Bandwidth 3.8Gbps
- Maximum Switching Bandwidth 7.6Gbps
- Maximum Forwarding rate: 5.66Mpps with 64-byte packets (Line-rate at all packet sizes)
- Egress buffer: 2 MB
Unicast MAC addresses: 8000
- Internet Group Management Protocol (IGMP) multicast groups: 255
- Maximum virtual LANs (VLANs): 1005
- IPv4 MAC security ACEs: 384 (default ternary content-addressable memory [TCAM] template)
- Bidirectional, 128 NAT translation entries
- IPv4 routing: 3500 routes, IPv6 routing: 1750 routes
8Ptos 10/100 FE + 2Combo Ports Gigabit Ethernet Ports LAN Base
Product Especifications:
- Hardware: 256 MB DRAM with ECC memory. IEEE 1588v2 FPGA. 64 MB on-board flash memory. 1GB removable SD flash memory card (optional). Mini-USB connector.
- Alarm: Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay.
LAN Base license Baseline features:
- Layer 2 switching: VTPv3, EtherChannel, Voice VLAN, Flexlink
- Security: IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL)
- Quality of service: IPv4 Ingress Policing, Rate-Limit, Egress Queuing / Shaping, AutoQoS, PROFINET QoS
- Management: Port-Based DHCP, Storm Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM)
- Industrial Ethernet: IEEE 1588 PTPv2
- IPv4 routing: IPv4 static routing
- IPv6 routing: IPv6 host support, HTTP over IPv6, SNMP over IPv6
Industry standards:
- UL508
- CSA C22.2 No. 142
- EN 61131-2 (EMC/EMI, environmental, mechanical)
- Protective coating (specific models only)
- Marine DnV
- Substation KEMA (IEEE 1613, IEC 61850-3)
- Railway EN 50155 (EMI/EMC, environmental, mechanical)
- EN50121-3-2
- EN50121-4
- NEMA TS-2 (EMC, environmental, mechanical)
- ABB Industrial IT certification
- IP30
- ODVA Industrial Ethernet/IP support
- PROFINETv2.3 support
Product details:
The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
- Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected
models); fixed configurations with a compact form factor
- Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
- Dual-input DC power supply, alarm relays, DIN rail mount
- Industrial Power over Ethernet (PoE) solution
- Conformal coating available
- Swappable SD flash card and mini-USB connector
- Industrial environmental compliance and certifications
- Industrial partner applications: Ethernet/IP and PROFINET
Switch performance and scalability:
- Maximum Forwarding Bandwidth 3.8Gbps
- Maximum Switching Bandwidth 7.6Gbps
- Maximum Forwarding rate: 5.66Mpps with 64-byte packets (Line-rate at all packet sizes)
- Egress buffer: 2 MB
Unicast MAC addresses: 8000
- Internet Group Management Protocol (IGMP) multicast groups: 255
- Maximum virtual LANs (VLANs): 1005
- IPv4 MAC security ACEs: 384 (default ternary content-addressable memory [TCAM] template)
- Bidirectional, 128 NAT translation entries
- IPv4 routing: 3500 routes, IPv6 routing: 1750 routes
8Ptos 10/100 FE + 2Combo Ports Gigabit Ethernet Ports LAN Base
Product Especifications:
- Hardware: 256 MB DRAM with ECC memory. IEEE 1588v2 FPGA. 64 MB on-board flash memory. 1GB removable SD flash memory card (optional). Mini-USB connector.
- Alarm: Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay.
LAN Base license Baseline features:
- Layer 2 switching: VTPv3, EtherChannel, Voice VLAN, Flexlink
- Security: IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL)
- Quality of service: IPv4 Ingress Policing, Rate-Limit, Egress Queuing / Shaping, AutoQoS, PROFINET QoS
- Management: Port-Based DHCP, Storm Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM)
- Industrial Ethernet: IEEE 1588 PTPv2
- IPv4 routing: IPv4 static routing
- IPv6 routing: IPv6 host support, HTTP over IPv6, SNMP over IPv6
Industry standards:
- UL508
- CSA C22.2 No. 142
- EN 61131-2 (EMC/EMI, environmental, mechanical)
- Protective coating (specific models only)
- Marine DnV
- Substation KEMA (IEEE 1613, IEC 61850-3)
- Railway EN 50155 (EMI/EMC, environmental, mechanical)
- EN50121-3-2
- EN50121-4
- NEMA TS-2 (EMC, environmental, mechanical)
- ABB Industrial IT certification
- IP30
- ODVA Industrial Ethernet/IP support
- PROFINETv2.3 support
- Fabricante
- Cisco
- Velocidad transmisión
- 10/100
- Número de puertos
- 8
- Puertos Uplink
- RJ45/SFP - 1GB
- PoE+
- No
- Gama de producto
- Enterprise
Nuevo