IGS-501T slim-type Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-negotiation ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (9~48V DC or 24V AC). The IGS-501T is able to operate in any harsh environment with operating temperature ranging from -40 to 75 degrees C.
Switch IP30 Slim type 5-Port Industrial Gigabit Ethernet Switch (-40 to 75 degree C).
Hardware Specifications:
- Copper Ports: 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
- Connector: Removable 6-pin terminal block. Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
- Alarm: Provides one relay output for power failure
- Alarm relay current carry ability: 1A@DC 24V
- ESD Protection: 6KV
- EFT Protection: 6KV
- Power Requirements: 9~48V DC, redundant power with polarity reverse protection function, 24V AC power support
- Power Consumption / Dissipation: 2.8 watts/9.5BTU
- Installation: DIN-rail kit and wall-mount ear
- EnclosureIP30 metal case
- Dimensions (W x D x H): 32 x 87 x 135 mm
- Weight: 430g
Switch Specifications
- Switch Processing Scheme: Store-and-Forward
- Address Table: 2K entries
- Buffer Memory: 4M bits on-chip buffer memory
- Flow Control: Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
- Switch Fabric: 10Gbps
- Throughput (packet per second): 7.4Mpps@64bytes
- Jumbo Frame: 9K
- Network Cables: 10/100/1000BASE-T. Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters). EIA/TIA-568 100-ohm STP (max. 100 meters)
Hardware Specifications:
- Copper Ports: 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
- Connector: Removable 6-pin terminal block. Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
- Alarm: Provides one relay output for power failure
- Alarm relay current carry ability: 1A@DC 24V
- ESD Protection: 6KV
- EFT Protection: 6KV
- Power Requirements: 9~48V DC, redundant power with polarity reverse protection function, 24V AC power support
- Power Consumption / Dissipation: 2.8 watts/9.5BTU
- Installation: DIN-rail kit and wall-mount ear
- EnclosureIP30 metal case
- Dimensions (W x D x H): 32 x 87 x 135 mm
- Weight: 430g
Switch Specifications
- Switch Processing Scheme: Store-and-Forward
- Address Table: 2K entries
- Buffer Memory: 4M bits on-chip buffer memory
- Flow Control: Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
- Switch Fabric: 10Gbps
- Throughput (packet per second): 7.4Mpps@64bytes
- Jumbo Frame: 9K
- Network Cables: 10/100/1000BASE-T. Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters). EIA/TIA-568 100-ohm STP (max. 100 meters)
- Fabricante
- Planet Networking
- Velocidad transmisión
- 1GB
- Número de puertos
- 5
- PoE+
- No
- Gama de producto
- Enterprise
Nuevo