Punto de Acceso Cisco Meraki MR30H Cloud Managed 802.11AC

802.11ac Wave 2 wireless with integrated gigabit switch.

Ideal use cases:
- In-room hotel or dormitory deployments
- IP-enabled devices in the same room
Hardware features.
- Integrated 4 port gigabit switch
- 3 radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
- Integrated Bluetooth BLE radio
- 2x2 MU-MIMO 802.11ac Wave 2
- Up to 1.3 Gbps aggregate dual-band frame rate
- 802.3af PoE compatible
Cloud management:
- Network-wide visibility and control
- Self-provisioning for rapid deployment
- Automatic reporting
- Seamless firmware updates
Enterprise security:
- 802.1X integration
- Air Marshal: real-time WIPS with forensics
- Stateful Layer 3-7 firewall
- Identity-based group policies
- Built-in antivirus scan (NAC)
Guest access:
- 1-click secure guest access
- Guest isolation firewall
- Customizable splash pages
RF optimization:
- Dual-concurrent, 2-stream MIMO radios
- Radios optimized for rate-vs-range performance
- Third radio dedicated to security and RF management
- Built-in real-time RF spectrum view
- Cloud-based automatic RF optimization
Layer 7 traffic shaping:
- Classify hundreds of applications
- Create per-application bandwidth limits
- Prioritize productivity apps
- Restrict recreational traffic
Location Analytics:
- Measure visitor capture rate, visit length, and repeat visit rate
- Measure visitor trends over time and compare performance across locations.
- Enable location services through integrated iBeacon functionality

- Radios:
2.4 GHz 802.11b/g/n/ac client access radio
5 GHz 802.11a/n/ac client access radio
2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support
Concurrent operations of all four radios
- Operating Bands:
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725 -5.825 GHz (UNII-3)
- 802.11ac & 802.11n Capabilities:
2x2 multiple input, multiple output (MIMO) with two spatial streams
SU-MIMO and MU-MIMO support
Maximal ratio combining (MRC) & Beamforming
20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac)
Up to 256 QAM on both 2.4 GHz and 5 GHz bands
Packet aggregation
- Power:
Power over Ethernet: 37 - 57 (802.3at compatible)
Power consumption: 25W max (802.3at)
802.3af operating mode disables PoE out
Power over Ethernet injector sold separately
- Mounting:
Mounting hardware included for US, UK, EU, AU & Asia single gang wall jacks
- Physical Security.
Two security screw options (included)
Concealed mount plate
- Environment:
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
- Physical Dimensions:
6.1” x 4.3” x 0.9” (155 mm x 110 mm x 23 mm), not including mount foot or mount plate. Weight: 14.4 oz (409 g)
- Antenna:
Integrated omni-directional antennas (3.7 dBi gain at 2.4 GHz, 4.8 dBi gain at 5 GHz).
- Interfaces:
1 × 10/100/1000 BASE-T Ethernet (RJ45) input
1 × Gigabit Ethernet (RJ45) with 802.3af Power over Ethernet output
3 × Gigabit E: thernet (RJ45) out
- Security
Integrated layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1Q) and tunneling with IPSec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
- Quality of Service:
Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
- Mobility:
PMK, OKC, and 802.11r for fast Layer 2 roaming
Distributed or centralized Layer 3 roaming
- LED Indicators:
4x 2 Ethernet status for Ethernet ports
1 power/booting/firmware upgrade status