Punto acceso Exterior Cisco 1560 s. Ant. Int. 802.11ac Wave2
AIR-AP1562I-E-K9
Cisco Aironet® 1560 Series Outdoor Access Points offer the latest 802.11ac Wave 2 functions in a rugged, low-profile housing that service providers and enterprises can deploy easily. Cisco CleanAir® technology for spectrum intelligence. Cisco ClientLink technology for beamforming. Radio Resource Management (RRM) for dynamic transmitter channel and...
Cisco Aironet® 1560 Series Outdoor Access Points offer the latest 802.11ac Wave 2 functions in a rugged, low-profile housing that service providers and enterprises can deploy easily.
- Cisco CleanAir® technology for spectrum intelligence. Cisco ClientLink technology for beamforming.
- Radio Resource Management (RRM) for dynamic transmitter channel and power control.
- 802.11ac Wave 2 radio Provides up to 1.3-Gbps data rates with 3 x 3 multiple input, multiple output (MIMO) and up to three spatial streams Multiuser MIMO (MU-MIMO)
- Allows transmission of data to multiple 802.11ac Wave 2-capable clients simultaneously to improve client experience; prior to 802.11ac Wave 2, access points could transmit data to only one client at a time, typically referred to as single-user MIMO Flexible deployment modes Allows for deployment of the 1560 in a variety of ways including point-to-point and mesh networks; it can also be deployed with the Cisco Mobility Express Solution, which is ideal for small to medium-sized deployments that that require 25 or fewer access points without a physical controller; all deployment modes are easy to set up and configure Small Form-Factor Pluggable (SFP) port Supports optical fiber-based network connectivity for remote locations. 802.11ac Wave 1 and 2 capabilities: 1562E: 2 x 2 MIMO with two spatial streams.
- Multi- and single-user MIMO.
- Maximal ratio combining (MRC).
- 802.11ac beamforming (transmit beamforming). 20-, 40-, and 80-MHz channels.
- PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz).
- Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx). 802.11 dynamic frequency selection (DFS).
- Cyclic-shift-diversity (CSD) support.
- Maximum conducted transmit power 1562E: 2.4 GHz: 27 dBm with 2 antennas. 5 GHz: 27 dBm with 2 antennas.
- Interfaces: WAN port 10/100/1000BASE-T Ethernet, autosensing (RJ-45), PoE in. SFP port (fiber or electrical). Management console port (RJ-45).
- Multicolor LED. DC power input.
- Reset button.
- Uplink options Ethernet, SFP, and wireless mesh.
- Powering options: AC (with AIR-PWRADPT-RGD1=, AC/DC outdoor power adapter). 4457 VDC input. Universal Power of Ethernet (UPoE), 802.3at
- Power consumption: 25W
- Dimensions (L x W x D): (22.9 x 17.1 x 9.8 cm).
- Cisco CleanAir® technology for spectrum intelligence. Cisco ClientLink technology for beamforming.
- Radio Resource Management (RRM) for dynamic transmitter channel and power control.
- 802.11ac Wave 2 radio Provides up to 1.3-Gbps data rates with 3 x 3 multiple input, multiple output (MIMO) and up to three spatial streams Multiuser MIMO (MU-MIMO)
- Allows transmission of data to multiple 802.11ac Wave 2-capable clients simultaneously to improve client experience; prior to 802.11ac Wave 2, access points could transmit data to only one client at a time, typically referred to as single-user MIMO Flexible deployment modes Allows for deployment of the 1560 in a variety of ways including point-to-point and mesh networks; it can also be deployed with the Cisco Mobility Express Solution, which is ideal for small to medium-sized deployments that that require 25 or fewer access points without a physical controller; all deployment modes are easy to set up and configure Small Form-Factor Pluggable (SFP) port Supports optical fiber-based network connectivity for remote locations. 802.11ac Wave 1 and 2 capabilities: 1562E: 2 x 2 MIMO with two spatial streams.
- Multi- and single-user MIMO.
- Maximal ratio combining (MRC).
- 802.11ac beamforming (transmit beamforming). 20-, 40-, and 80-MHz channels.
- PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz).
- Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx). 802.11 dynamic frequency selection (DFS).
- Cyclic-shift-diversity (CSD) support.
- Maximum conducted transmit power 1562E: 2.4 GHz: 27 dBm with 2 antennas. 5 GHz: 27 dBm with 2 antennas.
- Interfaces: WAN port 10/100/1000BASE-T Ethernet, autosensing (RJ-45), PoE in. SFP port (fiber or electrical). Management console port (RJ-45).
- Multicolor LED. DC power input.
- Reset button.
- Uplink options Ethernet, SFP, and wireless mesh.
- Powering options: AC (with AIR-PWRADPT-RGD1=, AC/DC outdoor power adapter). 4457 VDC input. Universal Power of Ethernet (UPoE), 802.3at
- Power consumption: 25W
- Dimensions (L x W x D): (22.9 x 17.1 x 9.8 cm).
- Fabricante
- Cisco
- Gama de producto
- Enterprise
Nuevo
16 otros productos en la misma categoría:
Access Point
Punto de Acceso Exterior Cisco Meraki 802.11AC IP67
TECNOLOGÍA INALÁMBRICA
Punto de Acceso Cisco Catalyst 9100 WiFi6 802.11ax Outdoor
Toca para hacer zoom
