CU 7052 4P. Data cable, F/FTP, Category 7, AWG23, Euroclass Dca.
Photo Details:
1 - Inner conductor: AWG23 Bare copper wire
2 - PE insulated conductor: 1.4 mm Ø
3 - Screen (pair): Alu PETP foil
4 - Drain wire: Tinned copper wire
5 - Overall screen: Alu PETP foil
6 - Outer sheath: FRNC/LS0H orange RAL 2003.....
Photo Details:
1 - Inner conductor: AWG23 Bare copper wire
2 - PE insulated conductor: 1.4 mm Ø
3 - Screen (pair): Alu PETP foil
4 - Drain wire: Tinned copper wire
5 - Overall screen: Alu PETP foil
6 - Outer sheath: FRNC/LS0H orange RAL 2003.....
CU 7052 4P. Data cable, F/FTP, Category 7, AWG23, Euroclass Dca.
Photo Details:
1 - Inner conductor: AWG23 Bare copper wire
2 - PE insulated conductor: 1.4 mm Ø
3 - Screen (pair): Alu PETP foil
4 - Drain wire: Tinned copper wire
5 - Overall screen: Alu PETP foil
6 - Outer sheath: FRNC/LS0H orange RAL 2003.
Description:
- Electrically and mechanically advanced quality Cat.7 data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-4-1.
- Excellent shielding effect due to individually screened pairs and overall foil screen.
- Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Application:
- Data cable for structured premises cabling.
- For the transmission of digital and analogue voice, video and data signals.
- Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the - transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
- Applicable for Power over Ethernet (PoE) / PoE+.
Electrical Properties:
- Loop resistance at 20° C: 140 O/km
- Mutual capacitance: 42 pF/m
- Impedance at 100 MHz: 100 O ±5 O
- Coupling attenuation, (limit curve of critical state -IEC 61156):> 85 dB
- Near end unbalance attenuation LCL at 1-600 MHz : > 40 dB
- Delay Skew: 12 ns/100 m
- NVP: 81 %.
Mechanical properties:
- Bending radius (flat side), during draw-in: = 60 mm, permanently installed: = 30 mm.
- Tensile strength: = 110 N= 220 N
- Crush resistance: = 1000 N/10 cm
- Impact: = 10 impacts
- Temperature range, during installation: 0° C to + 50° C, in operation:-20° C to + 60°C.
Standards:
- Wire colour: white/bluewhite/orangewhite/greenwhite/brownin accordance with IEC 60189 and IEC 60708.
- Imprint: DATWYLER «cable type» «additional text» «batch number» «meter marks». Zero halogen, no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA.
- Flame propagation: IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
- Flame spread: IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
- Smoke density: IEC 61034-1/-2, EN 61034-1/-2 , VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD.
- Reaction to fire (Euroclasses) EN 13501-6: Dca-s2,d1,a1
- PoE: IEEE 802.3at
- EMC: shielded.
- Segregation class: c
- Cat./Class: Cat 7 / Class F - limit values as specified by IEC 61156-6 and EN 50288-4-2 guaranteed.
Photo Details:
1 - Inner conductor: AWG23 Bare copper wire
2 - PE insulated conductor: 1.4 mm Ø
3 - Screen (pair): Alu PETP foil
4 - Drain wire: Tinned copper wire
5 - Overall screen: Alu PETP foil
6 - Outer sheath: FRNC/LS0H orange RAL 2003.
Description:
- Electrically and mechanically advanced quality Cat.7 data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-4-1.
- Excellent shielding effect due to individually screened pairs and overall foil screen.
- Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Application:
- Data cable for structured premises cabling.
- For the transmission of digital and analogue voice, video and data signals.
- Suitable for all ICT network applications up to class F applications (600 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the - transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
- Applicable for Power over Ethernet (PoE) / PoE+.
Electrical Properties:
- Loop resistance at 20° C: 140 O/km
- Mutual capacitance: 42 pF/m
- Impedance at 100 MHz: 100 O ±5 O
- Coupling attenuation, (limit curve of critical state -IEC 61156):> 85 dB
- Near end unbalance attenuation LCL at 1-600 MHz : > 40 dB
- Delay Skew: 12 ns/100 m
- NVP: 81 %.
Mechanical properties:
- Bending radius (flat side), during draw-in: = 60 mm, permanently installed: = 30 mm.
- Tensile strength: = 110 N= 220 N
- Crush resistance: = 1000 N/10 cm
- Impact: = 10 impacts
- Temperature range, during installation: 0° C to + 50° C, in operation:-20° C to + 60°C.
Standards:
- Wire colour: white/bluewhite/orangewhite/greenwhite/brownin accordance with IEC 60189 and IEC 60708.
- Imprint: DATWYLER «cable type» «additional text» «batch number» «meter marks». Zero halogen, no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA.
- Flame propagation: IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
- Flame spread: IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
- Smoke density: IEC 61034-1/-2, EN 61034-1/-2 , VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD.
- Reaction to fire (Euroclasses) EN 13501-6: Dca-s2,d1,a1
- PoE: IEEE 802.3at
- EMC: shielded.
- Segregation class: c
- Cat./Class: Cat 7 / Class F - limit values as specified by IEC 61156-6 and EN 50288-4-2 guaranteed.
- Fabricante
- Datwyler IT Infra
- Color
- Naranja
- Categoría RJ45
- Cat.7/7A
- Apantallado
- F/FTP
- Tipo de cable RJ45
- Sólido
Nuevo