Cable RJ45 Cat.6 U/UTP EXTERIOR PE CU662 Fca 500mts
19421500FL
Data cable, U/UTP, Category 6, AWG24, Euroclass Fca. CU 662 4P Outdoor.
1 Inner conductor: AWG 24 Bare copper wire
2 PE insulated conductor: 1.0 mm Ø PE-Foam-Skin
3 Stabilising element designed for:
- robustness
- quick and easy termination
- stable electrical performance
4 Structural element: diffusion barrier
5 Ripcord
6 Outer sheath: PE black...
1 Inner conductor: AWG 24 Bare copper wire
2 PE insulated conductor: 1.0 mm Ø PE-Foam-Skin
3 Stabilising element designed for:
- robustness
- quick and easy termination
- stable electrical performance
4 Structural element: diffusion barrier
5 Ripcord
6 Outer sheath: PE black...
Data cable, U/UTP, Category 6, AWG24, Euroclass Fca. CU 662 4P Outdoor.
1 Inner conductor: AWG 24 Bare copper wire
2 PE insulated conductor: 1.0 mm Ø PE-Foam-Skin
3 Stabilising element designed for:
- robustness
- quick and easy termination
- stable electrical performance
4 Structural element: diffusion barrier
5 Ripcord
6 Outer sheath: PE black
Description:
- Electrically and mechanically advanced quality Cat.6 data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 und EN 50288-6-1.
- Robust cable design with a very high mechanical stability and reliable electrical performance thanks to the stabilising element.
- Enhanced UV protection due to PE outer sheath.
- Simple, fast and reliable termination thanks to the special cable stripper Abi 62 (Article No. 185640). This tool is applicable for
- removal of outer sheath
- removal of stabilising element from pairs
- Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Application:
- Data cable for outdoor installation.
- For the transmission of digital and analogue voice, video and data signals.
- Suitable for all ICT network applications up to class E applications (250 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
- Applicable for Power over Ethernet (PoE) / PoE+.
Electrical Properties:
- Loop resistance at 20° C: 155 O/km
- Mutual capacitance: 50 pF/m
- Impedance at 100 MHz: 100 O ±5 O
- Delay Skew: 35 ns/100 m
- NVP: 67 %.
Mechanical properties:
Bending radius: during draw-in:= 58 mm. Permanently installed:= 29 mm
Tensile strength: = 110 N
Crush resistance: = 3000 N/10 cm
Impact: = 30 impacts
Temperature rangeduring installation:0° C to + 50° C. in operation: -30° C to + 60° C.
Standards:
Wire colour
white-blue/bluewhite-orange/orangewhite-green/greenwhite-brown/brown(with longitudinal stripes)in accordance with IEC 60189 and IEC 60708
Imprint
DATWYLER «cable type» «additional text» «batch number» «meter marks»
Zero halogen, no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Smoke density
IEC 61034-1/-2, EN 61034-1/-2 , VDE 0482-1034-1/-2
Reaction to fire (Euroclasses).
EN 13501-6: Fca. PoE: IEEE 802.3af/at
Segregation class: c
Cat./Class: Cat 6 / Class E - limit values as specified by IEC 61156-5 and EN 50288-6-1 guaranteed
1 Inner conductor: AWG 24 Bare copper wire
2 PE insulated conductor: 1.0 mm Ø PE-Foam-Skin
3 Stabilising element designed for:
- robustness
- quick and easy termination
- stable electrical performance
4 Structural element: diffusion barrier
5 Ripcord
6 Outer sheath: PE black
Description:
- Electrically and mechanically advanced quality Cat.6 data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 und EN 50288-6-1.
- Robust cable design with a very high mechanical stability and reliable electrical performance thanks to the stabilising element.
- Enhanced UV protection due to PE outer sheath.
- Simple, fast and reliable termination thanks to the special cable stripper Abi 62 (Article No. 185640). This tool is applicable for
- removal of outer sheath
- removal of stabilising element from pairs
- Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Application:
- Data cable for outdoor installation.
- For the transmission of digital and analogue voice, video and data signals.
- Suitable for all ICT network applications up to class E applications (250 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
- Applicable for Power over Ethernet (PoE) / PoE+.
Electrical Properties:
- Loop resistance at 20° C: 155 O/km
- Mutual capacitance: 50 pF/m
- Impedance at 100 MHz: 100 O ±5 O
- Delay Skew: 35 ns/100 m
- NVP: 67 %.
Mechanical properties:
Bending radius: during draw-in:= 58 mm. Permanently installed:= 29 mm
Tensile strength: = 110 N
Crush resistance: = 3000 N/10 cm
Impact: = 30 impacts
Temperature rangeduring installation:0° C to + 50° C. in operation: -30° C to + 60° C.
Standards:
Wire colour
white-blue/bluewhite-orange/orangewhite-green/greenwhite-brown/brown(with longitudinal stripes)in accordance with IEC 60189 and IEC 60708
Imprint
DATWYLER «cable type» «additional text» «batch number» «meter marks»
Zero halogen, no corrosive gases
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Smoke density
IEC 61034-1/-2, EN 61034-1/-2 , VDE 0482-1034-1/-2
Reaction to fire (Euroclasses).
EN 13501-6: Fca. PoE: IEEE 802.3af/at
Segregation class: c
Cat./Class: Cat 6 / Class E - limit values as specified by IEC 61156-5 and EN 50288-6-1 guaranteed
- Fabricante
- Datwyler IT Infra
- Color
- Naranja
- Categoría RJ45
- Cat.6
- Apantallado
- U/UTP
- Tipo de cable RJ45
- Exterior
Nuevo
16 otros productos en la misma categoría:
ESTRUCTURADOS DE RED
Cable Industrial Ethernet PROFINET tipo A SIEMENS FC TP 2x2x0,64mm 200mts
Toca para hacer zoom
